BluePrint Engines 632CI ProSeries Stroker Crate Engine | Big Block GM Style | Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$11,999.00
Part #: PS6320CTC

Description

Dyno Tested Warranty
  • HP & Torque: 815 HP / 800 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.600"
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Tall Deck

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    4.750" Stroke
    Forged H-beam 6.635" connecting rods
    Forged Pistons
    Internal

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -PS8012
    119cc chamber
    2.30" intake/1.88" exhaust valves
    358cc intake/125cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .647 Intake .647 Exhaust
    258 Intake / 266 Exhaust duration
    @ .050 - 112 degree lobe separation

Also Includes:

  • Carburetor
    Aluminum, single plane
    intake manifold
    MSD Pro Billet distributor
    Valve covers, oil pan and timing cover
    spark plugs
    spark plug wires
    Harmonic balancer
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Part #: PS6320CTC

Description

Dyno Tested Warranty
  • HP & Torque: 815 HP / 800 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.600"
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Tall Deck

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    4.750" Stroke
    Forged H-beam 6.635" connecting rods
    Forged Pistons
    Internal

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -PS8012
    119cc chamber
    2.30" intake/1.88" exhaust valves
    358cc intake/125cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .647 Intake .647 Exhaust
    258 Intake / 266 Exhaust duration
    @ .050 - 112 degree lobe separation

Also Includes:

  • Carburetor
    Aluminum, single plane
    intake manifold
    MSD Pro Billet distributor
    Valve covers, oil pan and timing cover
    spark plugs
    spark plug wires
    Harmonic balancer
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Customer Reviews

Based on 1 review Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: PS6320CTC

Fuel Delivery Type: Carbureted, 1050cfm

Spark Plug: Champion 792

Spark Plug Gap: .035"

Harmonic Balancer: Non-Weighted

Flexplate/Flywheel: Non-Weighted

Stall Converter: 2200+

Intake Manifold: Single plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 16-20 and total timing 32-34 by 2500 RPM

Firing Order: 1,8,4,3,6,5,7,2

Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page