BluePrint Engines 408CI Stroker Crate Engine | Small Block Ford Style | Longblock | Aluminum Heads | Roller Cam

$5,230.00
Part #: BPF4084CT

Description:  

Dyno Tested Warranty
  • HP & Torque: 425 HP / 455 FT LBS
    Compression Ratio: 9.8:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    Forged I-beam 6.000" connecting rods
    Hypereutectic pistons
    28oz External balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9008
    60cc chamber
    2.02" intake/1.60" exhaust valves
    190cc intake/65cc exhaust runners

Cam Specs:

  • Roller
    .543 Intake / .554 Exhaust
    218 Intake / 226 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Oil pan, timing cover and valve covers
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
    *A bronze distributor gear is NOT recommended on this engine

Part #: BPF4084CT

Description:  

Dyno Tested Warranty
  • HP & Torque: 425 HP / 455 FT LBS
    Compression Ratio: 9.8:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    Forged I-beam 6.000" connecting rods
    Hypereutectic pistons
    28oz External balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9008
    60cc chamber
    2.02" intake/1.60" exhaust valves
    190cc intake/65cc exhaust runners

Cam Specs:

  • Roller
    .543 Intake / .554 Exhaust
    218 Intake / 226 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Oil pan, timing cover and valve covers
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
    *A bronze distributor gear is NOT recommended on this engine

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BPF4084CT

Fuel Delivery Type: Carbureted, 750cfm ** Not included**

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer: 28 Ounce, 6.4" Diameter

Flexplate/Flywheel: 28 Ounce, Weighed

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page