BluePrint Engines 306CI Crate Engine | Small Block Ford Style | Longblock | Aluminum Heads | Roller Cam

$3,850.00
Part #: BP3060CT

Description:

  • HP & Torque: 370 HP / 350 FT LBS
    Compression Ratio: 9.5:1
    Aluminum Heads
    Hypereutectic Pistons
    Roller Cam
    Cast Steel Crank

Block:

  • Hand picked seasoned blocks 
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness

Rotating Assembly:

  • Cast steel crankshaft
    Rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Hastings Moly rings
    Balanced rotating assembly
    High volume oil pump
    Hydraulic roller camshaft
    Heavy duty double roller timing set

Cylinder Heads:

  • BluePrint Performance Aluminum
    58-60cc Chamber, 190cc runner
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves
    BP Aluminum Head Part# HP9009

Cam Specs:

  • Cam Type: Roller
    .543 Intake .554 Exhaust
    218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees at 3500 RPM

Also Includes:

  • Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno test results shipped with engine

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • Not for use in pollution controlled vehicles.

        *A bronze distributor gear is NOT recommended on this engine

        Engine requires a standard v-belt rotation water pump and belt system.

        This engine is not compatible with factory fuel injection.

      Part #: BP3060CT

      Description:

      • HP & Torque: 370 HP / 350 FT LBS
        Compression Ratio: 9.5:1
        Aluminum Heads
        Hypereutectic Pistons
        Roller Cam
        Cast Steel Crank

      Block:

      • Hand picked seasoned blocks 
        Square and parallel decked
        Align honed main bearing bore
        Cylinders honed on computer controlled machine to within .0002 straightness and roundness
        Cylinders are sonic tested for thickness

      Rotating Assembly:

      • Cast steel crankshaft
        Rods w/ 150,000 psi bolts
        Hypereutectic pistons
        Hastings Moly rings
        Balanced rotating assembly
        High volume oil pump
        Hydraulic roller camshaft
        Heavy duty double roller timing set

      Cylinder Heads:

      • BluePrint Performance Aluminum
        58-60cc Chamber, 190cc runner
        Hardened retainers and springs
        2.02 swirl polished intake valves
        1.60 swirl polished exhaust valves
        BP Aluminum Head Part# HP9009

      Cam Specs:

      • Cam Type: Roller
        .543 Intake .554 Exhaust
        218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separation

      Ignition Timing:

      • 34 degrees at 3500 RPM

      Also Includes:

      • Valve covers
        Painted oil pan
        Brass freeze plugs
        Dyno test results shipped with engine

          Warranty:

          • 30 month / 50,000 mile

          Notes:

          • Not for use in pollution controlled vehicles.

            *A bronze distributor gear is NOT recommended on this engine

            Engine requires a standard v-belt rotation water pump and belt system.

            This engine is not compatible with factory fuel injection.

          Customer Reviews

          Based on 1 review Write a review

          BluePrint Engines Add-On Recommendations & Specifications for Part Number: BP3060CT (Ford 306 Crate Engine | Longblock | Aluminum Heads | Roller Cam)

           

          Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

           

          Part Number: BP3060CT

          Fuel Delivery Type: Carbureted, 600cfm **Not included**

          Spark Plug: Champion 792

          Spark Plug Gap: .045"

          Harmonic Balancer: BPP50 - 50 Ounce, 6.4" Diameter

          Flexplate/Flywheel: 50 Ounce Weighted

          Stall Converter: 1800-2200 rpm

          Intake Manifold: Dual plane, satin aluminum

          Fuel Recommendation: 91 Octane

          Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

          Firing Order: 1,3,7,2,6,5,4,8

          Notes: Not for EGR *Painted Ford Blue* Engine requires a V-belt standard rotation water pump and belt system. Recommended break in oil for your BluePrint Crate Engine: BPP710

           

          Click here to download a copy of the Installation Guide that came with your BluePrint engine.

          Check Out This Product and More On Our Pinterest Page