GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged
GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged

GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged

SKU: PSLS4272SCTK

GM LS Compatible 427 c.i. ProSeries Engine - 800 Horsepower - Deluxe Dressed with Polished Pulley Kit - Supercharged

SKU: PSLS4272SCTK

Horsepower & Torque: 800 Horsepower / 780 FT. LBS. Torque

Cylinder Heads: BluePrint Engines LS3 Aluminum Cylinder Heads

Compression Ratio: 11:1

Camshaft: Hydraulic Roller Cam - .624 Intake / .624 Exhaust Lift and 239 Intake / 255 Exhaust Duration @ .050 - 114° LSA - Three Bolt Cam

Pistons: Forged

Crankshaft: Steel Crank - 4.125" Stroke and 6.125" Rods

/
  • Secure payments
  • Financing available at checkout with Affirm

Description:

  • Horsepower & Torque: 800 Horsepower / 780 FT. LBS. Torque
  • Compression Ratio: 11:1
  • Aluminum Heads
  • Hydraulic Roller Cam
  • Forged Crank
  • Forged Pistons

Block:

  • OEM 7.0L Aluminum Block Machined in the USA!
  • 6-Bolt Main
  • 4.0685" Bored
  • 1-Piece Rear Main Seal

Rotating Assembly:

  • New Forged Crankshaft
  • 4.125" Stroke
  • Forged 6.125" Connecting Rods
  • Forged Pistons
  • Front and Rear Internally Balanced

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - PS8015
  • 70cc Chamber
  • 2.165" Intake / 1.590" Exhaust Valves
  • 259cc Intake / 102cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller
  • .624 Intake / .624 Exhaust Lift
  • 239 Intake / 255 Exhaust Duration
  • @.050-114 Degree Lobe Separation

Ignition Timing:

  • ECM Supplied with Calibration
  • Not Capable of Transmission Control
  • Transmission Controller Required if Paired to an Automatic

Also Includes:

  • 2.3L Magnuson TVS Super Charger
  • Front Accessory Drive with Alternator, Power Steering pump, AC Compressor and Water Pump
  • Upgraded Mototron S107 Injectors
  • Electronic Fuel Injection
  • Coil Packs
  • Valve Covers
  • Oil Pan
  • Complete ECU and Wiring harness package
  • Gas Pedal
  • Drive by Wire Throttle Body
  • Timing Cover
  • Spark Plugs and Wires
  • Harmonic Balancer

    Notes:

    • Not for use in pollution controlled vehicles.

    • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
    • The Included LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The included ECU is unlocked for further refinement at your local dyno shop if required.
    • BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.
     

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

      Part Number: PSLS4272SCTK

      Fuel Delivery Type: Electronic Fuel Injected

      Spark Plug: NGK 3689 (TR6IX) 

      Spark Plug Gap: .030"

      Harmonic Balancer: Non-Weighted

      Flexplate/Flywheel: Non-Weighted

      Stall Converter: 3200+

      Intake Manifold: LS3

      Fuel Recommendation: 91-93 Octane

      Timing (Initial/Total Advance): Ignition timing and spark advance are controlled by Powertrain Control Module

      Firing Order: 1,8,7,2,6,5,4,3

      Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR. 10-11 psi of boost 

      Header Partners: 
      Click here for our Header Partners and recommendations.

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      BETTER THAN THE REST.

      The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

      We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

      For a detailed overview of our warranty, click here.

      IT ALL COMES DOWN TO RESULTS.

      We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

      BRAGGING RIGHTS INCLUDED!

      A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

      This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

      RECOMMENDED PRODUCTS:
      BluePrint Engines Crate Engine Break-In Oil — 1 Quart
      BluePrint Engines 10w30 Engine Oil - 1 Quart
      TrueBlue Performance Octane Boost
      BluePrint Engines TrueBlue Performance Octane Booster
      BluePrint Engines TrueBlue UltraCool Antifreeze Coolant CONCENTRATE
      BluePrint Engines TrueBlue Power Steering Fluid
      BluePrint Engines TrueBlue Transmission Fluid UNIVERSAL ATF/MTF
      Gen IV LS and 2009+ Gen III Hemi Compatible Oil Filter
      Holley EFI In-Tank Retrofit Fuel Pump - 450 LPH - Return Style
      EFI Billet Aluminum Fuel Pressure Bypass Regulator - 40-75 PSI and -10AN ORB - Black
      Liquid Filled Fuel Pressure Gauge - 0-100 PSI
      Muscle car swap LS and Hemi Universal Air Intake Kit
      GM LSX Compatible Starter – Delco Style - OEM Finish
      168-Tooth Steel Flex Plate - 1-Piece Rear Main Seal - OEM LS 1-Piece Balance - 4L60E/4L70E - GM LS Compatible
      168-Tooth Nodular Iron Flywheel - 6-Bolt Crank - 11" or 12" Clutch - GM LS Compatible
      BluePrint Parts – GM LS Compatible Water Neck – 45°
      BluePrint Parts – GM LS Compatible Water Neck – Straight